RD10 Automatic RF Detector with High Sensitivity Line Adapter

The RD10 is designed to detect and locate electronic RF surveillance devices. The RD10 scans a very wide frequency range at high speed sounding an alarm indicating an RF power source while its small compact size allows the user to move with the unit to locate the source of the RF transmission.


  • High sensitivity and dynamic range
  • Wide frequency range with detection up to 25 GHz
  • Short pulse detection, peak level memory
  • Interference Filters
  • Audio signal demodulation
  • Geiger click indication
  • 4-way signal strength indication (bar, numerical, delayed bar, peak)
  • Detects all RF devices including digitally encoded
  • Detects spread spectrum, hopping and pulse transmissions
  • Detects cellular phones and GSM devices
  • Permanent protection: Events recording including time and signal level
  • RF background elimination
  • Possibility of calculating device radiated power and distance
  • Low power consumption and long battery life

Technical Specifications:

  • Frequency Band: 0.5 MHz – 25 GHz
  • Sensitivity: 0.06 mW ERP
  • Dynamic: 43 db
  • Impulse Detection: >80ys
  • HF Filter: -26 db – 10 MHz
  • Volume: 4 levels 36 db step
  • Memory: Up to 16 events
  • Antenna: Built-in adjustable from 1 to 37 cm
  • Power Supply: 9 V cell / 12-20 ext VDC
  • Power Consumption: 3.5 – 6 mA
  • Size: 150 X 60 X 31 mm
  • Weight: 295 g

RD10Line Adapter

The RD10 allows for the detection of various types of line surveillance devices. The low-frequency detection mode allows performing a spectrum analysis and detection of various devices from 18 kHz to 41 MHz. The RD10 equipped with the line adapter can detect a number of digital surveillance systems and standard communication systems such as ADSL and Ethernet over power lines and provides their selective frequency analysis.

The line adapter is supplied with the connection board with two parallel-connected RJ plugs and outputs for the connection of the adapter input. The connection board allows an operative check of standard telephone lines. An additional high voltage adapter provides the required connection to the power lines.

Technical Specifications

  • Audio Sensitivity: (300 – 3000 Hz) 0.1 m veff
  • RF Detection Sensitivity: 1.8 m veff
  • RF Frequency Range: 8 Sections 18 kHz – 41 MHz
  • Gain Control: Min. 30 DB
  • Input Insulation Ground (Green): 100N 275 V AC / Active (Red) 5N 440 V AC
  • Input Impedance: 100k ohm
  • RF Demodulation: AM / FM
  • Battery: 9 V (6F22) or 9 V Accumulator
  • Current Consumption: 2 – 5.5 mA
  • Accumulator Charging: 14 Hours, 12 V DC
  • Size: 112 X 92 X 48 mm
  • Weight: 280 g

High Voltage Connector:

  • Insulation Voltage: 2 X 440 V AC
  • Separation Capacity: 2X 5N

Connection and Testing Board:

  • 6 X Parallel Connected RJ12
  • 6 X Plug for Adapter Input Connection


  • Contact us for pricing information
  • Quantity discount pricing available.
  • 1-year warranty

Specialized Countermeasures and Intelligence Solutions

Contact Us

(416) 414-7231

Mailing Address

5979 Baldwin St. S P.O. Box 30022 Whitby, Ontario Canada L1M 0B5